With 10 years of accumulated technology and experience, the machine is more practical and durable.
Language
With 10 years of accumulated technology and experience, the machine is more practical and durable.
https://www.uv-printers.com/products-detail-235955
How to improve the printing speed of UV flatbed printer?
HYUNVAN UV Printing machine manufacturer give the solutions as below:
One: UV printer hardware upgrade
For example, upgrading from civil sprinklers to industrial sprinklers, from mid-end to high-end industrial sprinklers, and so on. The second is to expand the number of nozzles. For example, the original four-color plus one white and five nozzles have become 10 nozzles, double four-color plus two white. This method is very expensive and is also subject to other parts of the equipment. If the performance of other parts cannot meet the needs of high-speed printing after the upgrade, it cannot be upgraded either. Therefore, when choosing a UV flatbed printer, you need to know in advance whether the device supports upgrades and what are the upgrade modes.
Two: software settings
Generally, it is to change the printing mode of the UV flatbed printer. Sketch mode speed>production mode speed>high-precision mode speed; after meeting the user's pattern color requirements, select production mode speed or sketch mode speed as much as possible, which can greatly improve production efficiency.
Three: auxiliary mold use
In batch printing and production, whether it is material loading, positioning, and material picking. It is a waste of time if you need to manually fiddle with them one by one. At this time, it is necessary to make 2 sets of special molds for the material itself. When printing such a set, the substrate is placed in advance for the other set. The UV flatbed printer can print non-stop, and the time delay between loading and unloading is greatly reduced.
The solid effect can be achieved by two methods:
(1) changes the printing material: achieve the embossed effect through engraving machine or material itself texture, then use our UV flatbed printer to print in contraposition;
(2)we are with 3D stereo embossed printing technology. use white inks to print several times and make them pile up, to get the relief effect. The difference of this two methods are: the former method allows bigger height difference of three-dimensional effect, but with higher cost; the later with height difference limits, but can be piled up repeatedly when prints, and convenient operation technologies and coast can be controlled, but also with very good performance.
